How to Install Your Mac SSD into an OWC Envoy Pro Enclosure

Introduction

Getting Started

OWC’s Envoy Pro enclosures let you turn a Mac SSD (the one that came with your Mac) into a portable external drive. This guide will show you how to install Mac SSD into the Envoy Pro enclosure at home.

If you haven’t upgraded your SSD yet, you can find your Mac model on this article and look for the SSD Replacement guide.

Note: OWC Envoy Pro enclosures are specifically made for factory-installed Mac SSDs. They won’t work with other PCIe replacement drives or adapters, including OWC’s own Aura Pro drive.

What You Need

requirements to install mac ssd in owc, How to Install Mac SSD in owc

Parts

  • OWC Envoy Pro External SSD Enclosure (Mid 2012 and Early 2013 Macs)
  • External SSD Enclosure for Select Mid 2013 to Mid 2015 Macs
  • MacBook Air SSD (2013-2017) / MacBook Pro Retina SSD (2015)

Tools

  • T5 Torx Screwdriver

Step-by-Step Guide to Installing a Mac SSD into an OWC Envoy Pro Enclosure

Step 1

Installing a Mac SSD into an OWC Envoy Pro Enclosure,

To open the enclosure, pull the top half down toward the wedged end and lift it away from the bottom half.

Step 2

Installing a Mac SSD into an OWC Envoy Pro Enclosure, insert your Mac OEM SSD with the golden contact pads,

Carefully insert your Mac OEM SSD with the golden contact pads facing upward. Ensure the orientation is correct before applying any pressure. When fully inserted, you should barely see the golden contact points at the top, and the notch at the bottom should align with the screw hole in the enclosure.

Step 3

T5 Torx screwdriver,

Use a T5 Torx screwdriver to install the 6.5 mm screw that secures the bottom of the SSD.

Step 4

step to install mac ssd in owc envoy pro external enclosure, how to install mac ssd

Reinstall the top half of the enclosure and slide it closed.

Step 5

Use a T5 Torx screwdriver to install the two 7.6 mm screws on the bottom of the enclosure.

Step 6

OWC-Envoy-Pro-External-SSD-Enclosure

Remove the backing from the adhesive on the extra rubber foot provided. Place the sticky side of the rubber foot over the screws you just inserted and apply pressure for 30 seconds.

Step 7

OWC-Envoy-Pro-External-SSD-Enclosure

The drive is now ready to be connected to your computer using the included USB cable.

Conclusion

Once your drive is installed, you can transfer data from it or use Disk Utility to format it and use it as a Time Machine backup.

For more informative and interesting articles click here.

हिंदी में पढ़ने के लिए यहाँ क्लिक करे

Some Frequently Asked Questions

What are OWC Envoy Pro enclosures designed for?

OWC Envoy Pro enclosures are specifically made for factory-installed Mac SSDs and won’t work with other PCIe replacement drives or adapters, including OWC’s own Aura Pro drive.

What should I do if I haven’t upgraded my SSD yet?

You can find your Mac model in the provided article and look for the SSD Replacement guide.

What parts do I need to install a Mac SSD into an OWC Envoy Pro enclosure?

You need the following parts:
1. OWC Envoy Pro External SSD Enclosure (Mid 2012 and Early 2013 Macs)
2. External SSD Enclosure for Select Mid 2013 to Mid 2015 Macs
3. MacBook Air SSD (2013-2017) / MacBook Pro Retina SSD (2015)

What tools are required for the installation?

You need a T5 Torx Screwdriver.

Where can I find more informative and interesting articles?

Click here for more articles

Leave a Comment